whizzer71 0 Posted May 21, 2008 As per the title want to know the best map sensor to use with Emerald K3 management on a 406 2.0 T engine with T28 running around 1 Bar,Was thinking about a cossie one but didn't know If that would be suitable. Cheers Tristan Share this post Link to post Share on other sites
Tom Fenton 1,524 Posted May 21, 2008 Easiest way is to use the one Emerald supply, standard one they do is 2.5kPa absolute, so allows up to 1.5bar boost pressure. They also do a 3kPa absolute one but that is more expensive. I didn't mess with the map sensor settings on the one I've done as I used the Emerald sensor, but the settings can be changed so you should be able to calibrate the Emerald to work with any map sensor with enough range for the boost levels planned. Share this post Link to post Share on other sites
sounds of silence 2 Posted June 23, 2008 a cossy 2.5 bar or 3 bar is ideal thats what ill be using with my kms Share this post Link to post Share on other sites
