Richie-Van-GTi 74 2 Cars Posted January 18, 2008 Im back onto the 309 turbo loom I done a while ago, the car runs but has a few teething issues, trying to eliminate any wiring niggles. Hoping someone can confirm what all the following wires are on the 309 gti. These are the wires at the 2 multiplugs under the dash, listed from pin 1 onwards in order. white plug blank 76 earth 112 blank cc2 blank blank brown plug c1r 53 47 47a 7a 30 300? maybe 30c 30b 46 also there seems to be another brown multiplug under the dash not plugged in, cant find anywhere for it to go, about 6 or 8 pins, a few of which seem to be linked to a blue multiplug with less pins? Please help as we want to refit this tomorrow and have it out on the road as its my mates daily drive. Share this post Link to post Share on other sites
Sandy 191 Posted January 18, 2008 blank 76 Fuel pump earth 112 Tacho feed blank cc2 Ignition key 2nd click to ECU etc blank blank brown plug c1r Switched supply to reverse switch 53 Reverse switch back to main board 47 Water temp warning switch 47a Water temp sensor for gauge 7a Alternator warning light feed 30 Oil pressure warning switch 300? maybe 30c Oil temp sensor 30b Oil pressure sensor 46 Starter command also there seems to be another brown multiplug under the dash not plugged in, cant find anywhere for it to go, about 6 or 8 pins, a few of which seem to be linked to a blue multiplug with less pins? Central locking or electric windows related? Share this post Link to post Share on other sites
Richie-Van-GTi 74 2 Cars Posted January 18, 2008 central locking and windows all work, strangely dash doesnt, well the waning lights do but the oil pressure / oil light dont. Share this post Link to post Share on other sites
Sandy 191 Posted January 19, 2008 Fuse number 1 perhaps? Share this post Link to post Share on other sites
