willxs 0 Posted January 5, 2008 im 95% done on my conversion except ive come stuck. it turns over fine but there's no fuel or spark. i thought it'd be the ECU so i sent that off which turned out was unlocked but immobilised. they decoded the immobiliser sent it back, tried it today and still no avail. anyone with any suggestions? Cheers, Will Share this post Link to post Share on other sites
ericdean 0 Posted January 5, 2008 Hello mate I've just started this conversion and have read a few times about a switched live being needed to the double fuel pump relay but I'm not sure if this is already in the 306 loom as part of the cable CC1 or if it is needed extra, also I don't know what it looks like so i'm unable to help there!! eric Share this post Link to post Share on other sites
welshpug 1,627 Posted January 5, 2008 have you got power at the coils and injectors? Share this post Link to post Share on other sites
willxs 0 Posted January 5, 2008 i assume so. it was 205 parts who did the wiring, i tried getting hold of them before xmas but no-one answered. Share this post Link to post Share on other sites
Alastairh 47 Posted January 5, 2008 Thats strange. That loom use to be fitted to my brothers car, and that ran. Are you getting power to Pin 2, and pin 9 on the injector relay, as thats power for fuel and ign for that loom when i originally converted it. Drop me a pm if you like Al Share this post Link to post Share on other sites
