Mi16 Cam Cover Big Metal Clip Part Number?

[yorkshirekowboy 19 1 Cars]

hello all,

 

ive lost my mi16 cam cover clip, its the big on that slids onto the pins on side of the block keeping it secure to the block, ive tried to get one an the lower cam cover but no success,

 

so if you could find me the part number for the clip that would be good.

 

cheers guys

[welshpug 1,622]

is it a 1.9 Mi? if so here's the bits you need.

 

0324 32 FASTENER FORK 25.71 GBP

 

0320 91 BELT PROTECTOR 17.18 GBP

 

0324 31 SPACER DIAM 6,2X18-6 (2 needed) 1.08 GBP

 

0324 27 SPECIAL SCREW DIAM 6X100-12 (2 needed) 0.45 GBP

Edited December 12, 2007 by welshpug

[Pugnut 9 1 Cars]

i'm sure i have a spare one knocking around.

 

i bought one of hiflows engines and it had a damaged cover . I'll have a rummage later...

 

failing that then post an ad in wanted

 

Al

[yorkshirekowboy 19 1 Cars]

i'm sure i have a spare one knocking around.

 

i bought one of hiflows engines and it had a damaged cover . I'll have a rummage later...

 

failing that then post an ad in wanted

 

Al

 

 

cheers guys, yes its a mi 1.9, al, if you could find one i would gladly take it from you, i think i posted a ad in the wanted forum bit the other month...

 

 

oh i need the bottom pulley cover, its that separate, theres on ebay at the mo, along with a cover with clip, but i dont need the cover, just that silly clip

[welshpug 1,622]

check my sly edit

[yorkshirekowboy 19 1 Cars]

is it a 1.9 Mi? if so here's the bits you need.

 

0324 32 FASTENER FORK

 

0320 91 BELT PROTECTOR

 

0324 31 SPACER DIAM 6,2X18-6 (2 needed)

 

0324 27 SPECIAL SCREW DIAM 6X100-12 (2 needed)

 

 

what sub title is that all under on the pug parts mate? was sly mate ha

Edited December 12, 2007 by surferkid205

[welshpug 1,622]

there's another one mate

 

its in under "valve timing general" then "timing cover plugs"

[yorkshirekowboy 19 1 Cars]

there's another one mate

 

its in under "valve timing general" then "timing cover plugs"

 

 

25 quid for a bit of metal?????? what!!!!!!!

[welshpug 1,622]

make one yerself!

[yorkshirekowboy 19 1 Cars]

make one yerself!

 

 

was think the same thing, so might give it a go, also is the bottom pulley cover needed? as i dont have one...

[welshpug 1,622]

it is needed, as the top cover clips to the bolts that hold the bottom cover on.

[yorkshirekowboy 19 1 Cars]

it is needed, as the top cover clips to the bolts that hold the bottom cover on.

 

do you have one ive posted in the wanted bit god this engine is costing loadsand i havent even started it yet, so it better bloody work, or a sledge hammer go on to it or maybe through it!!!! ha