ANDYMISIXTEEN 0 Posted December 1, 2007 I cant get the big center nut undone on one shock, it just keeps spining the rod. Any ideas? Share this post Link to post Share on other sites
oli-pug 6 2 Cars Posted December 1, 2007 Have you tried wrapping the damper rod in an old rag or something then gripping it with a set of mole grips? An impact guns normally the best thing to get em undone Share this post Link to post Share on other sites
ANDYMISIXTEEN 0 Posted December 1, 2007 Tryed mole grips but still aint having it, ill have to take um to a garge see if they can undo them with an impact gun. Share this post Link to post Share on other sites
Rom 0 Posted December 1, 2007 Assuming it doesnt have a flat, or allen or something you can grab hold off. Then the only way i know is gripping with mole grips. Always wrap it, and always grip near the top of the srtut. So any damage isnt gonna be low down, and damage the seals as it moves up and down. Even with a gun they can still be tough. Share this post Link to post Share on other sites
Jrod 7 Posted December 1, 2007 I crack them off with the weight of the car on them, usually does it ok. Impact gun make it easier though. Share this post Link to post Share on other sites
j_turnell 134 3 Cars Posted December 1, 2007 If you havent got access to an impact gun just go to any garage and get them to wizz them off, otherwise you may damage the insert holding them with grips. Share this post Link to post Share on other sites
