DirtyFlare 0 Posted November 21, 2007 What is the size of the threads of the bolts that keep the discs attached to the hub on 1.9 hubs? I ask as the hubs that I brought advertised as "good order" have shagged wheel bearings and the bolts that keep discs in place have been sheared off so now have to drill them out and retap them. does anyone know the PCD of the two bolts? thanx in advantage Share this post Link to post Share on other sites
welshpug 1,626 Posted November 21, 2007 (edited) M6 or to be more precise; 6905 36 CAPSCREW DIAM 6X1.00-14mm Edited November 21, 2007 by welshpug Share this post Link to post Share on other sites
DirtyFlare 0 Posted November 21, 2007 cheers, i swore they were m6, but the old boys at work say they were m8 and were having none of it. good job i didnt listen to them Share this post Link to post Share on other sites
welshpug 1,626 Posted November 21, 2007 I think they may be M8 on other manufacturers, i.e sensible ones They're only locating screws anyway, so I cant imagine why people feel the need to tighten them to the point that they round off when someone wants to renew the discs!! Share this post Link to post Share on other sites
