Headling 0 Posted November 15, 2007 hi guys, i am after some new plastic ball joints for my 1.9 gear linkages? Can you get them on there own or do you have to buy the linkages and ball joints as a whole unit? Can you suggest anyone to purchase these from? thanks in advance, Mark Share this post Link to post Share on other sites
Miles 331 1 Cars Posted November 15, 2007 Never seen the one's with the ball size and thread size Pug use, It took me a while to find the one's I use with the locking pin's in which I use for my gear rods now Share this post Link to post Share on other sites
pdd144c 0 Posted November 15, 2007 Loads of people sell complete uprated rod kits, we do, Pug racing and Constella etc. Share this post Link to post Share on other sites
Headling 0 Posted November 15, 2007 thanks for the info, the standad ones will be fine i think, i take it most pug places do these kits? Share this post Link to post Share on other sites
Miles 331 1 Cars Posted November 15, 2007 You will have to order them up, there are 3, 2 that attach to the box and one from the gear lever Share this post Link to post Share on other sites
Headling 0 Posted November 20, 2007 thanks for replys, got some std ones for 46 quid from auto five,bargain! Share this post Link to post Share on other sites
Jrod 7 Posted November 20, 2007 You can get a uprated set for £50. Share this post Link to post Share on other sites
Anton green 12 1 Cars Posted November 20, 2007 I need gear rods -where should I go for these uprated £50 chopsticks? Share this post Link to post Share on other sites
Jrod 7 Posted November 20, 2007 Miles on here or X sport. http://forum.205gtidrivers.com/index.php?showtopic=81617 http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...em=250186416719 Share this post Link to post Share on other sites
Anton green 12 1 Cars Posted November 20, 2007 ta. will speak to the guy when the engine's in Share this post Link to post Share on other sites
sonofsam 5 Posted November 20, 2007 ta. will speak to the guy when the engine's in Are these for your 2.0T Anton? Share this post Link to post Share on other sites
Anton green 12 1 Cars Posted November 20, 2007 (edited) Yes, I'll need to speak with Miles as the links will need to be in slightly different positions due to the selector fork being altered -and maybe a few other things. I'suppose I'll know what I need exactly when its all in the bay, unless somebody already knows the spec required Edited November 20, 2007 by Anton green Share this post Link to post Share on other sites
sonofsam 5 Posted November 20, 2007 Cool, I'll be interested to hear what you can come up with Most have to bend the standard rod somewhat. 'Twas a faff! -half decent rods are ten a penny in the breakers Share this post Link to post Share on other sites
Miles 331 1 Cars Posted November 20, 2007 I;ve got a turbo one which I need to make the rod to suit as well, But I think the main problem is no 2 are alike so I can just supply the rod and joint's needed for this as it might not fit if I do it like mine Share this post Link to post Share on other sites
Anton green 12 1 Cars Posted November 20, 2007 I'll watch eagerly to see how you do it Miles! I have a way to go before I get to that stage yet Share this post Link to post Share on other sites