Ryan 99 Posted October 8, 2007 Are 309 diesel hubs the same as base-model 205 hubs? I wanted to swap them for my 1.6 hubs to give me a better choice of brakes. Share this post Link to post Share on other sites
pug_ham 242 3 Cars Posted October 9, 2007 No, all XU engined 309 hubs have the larger driveshaft spline like the 205 1.9 GTi hubs. Graham. Share this post Link to post Share on other sites
Ryan 99 Posted October 9, 2007 I'd got a feeling that was the case. Oh well... Share this post Link to post Share on other sites
peter 20 Posted October 18, 2007 So if all 309's have the larger hub then the shafts will all be 309 gti spec? (larger diameter shaft?) so can be used with the 309 gti wishbones to gain negative camber? Sorry, bit of a hijack but may be usefull Share this post Link to post Share on other sites
pug_ham 242 3 Cars Posted October 21, 2007 Yes, all 309 XU engine hubs cn be used with the driveshafts on a 205 for the negative camber along with the hubs from a 306 with the 16mm balljoint as theyhave the same sized driveflange splines. Graham. Share this post Link to post Share on other sites
