Bassman 1 Posted October 8, 2007 I bought some 307 HDi brakes about 8 months ago and I have finally got round to using them. I have dipped them in some rust remover and wire brushed them all over. Unfortunately without thinking I have painted them with Hammerite's "No.1 Rust Remover" or whatever it is called which is a thick primer and rust passivater. Before I go any further, do I need to remove this and only use a high temperature primer or will this be ok? I won't be using the car for track days (I don't think so anyway) and I tend to only use the car at weekends for b-road runs. Thanks Rob Share this post Link to post Share on other sites
pacey205 2 Posted October 8, 2007 Mine are just painted with Hammerite smoothrite (silver) and they have been fine. Michael Share this post Link to post Share on other sites
j_turnell 134 3 Cars Posted October 8, 2007 I also used hamerite, same as pacey and had no problems. Share this post Link to post Share on other sites
Edp 67 3 Cars Posted October 8, 2007 I used red caliper paint but hammerite will be fine. Share this post Link to post Share on other sites
Bassman 1 Posted October 8, 2007 I used red caliper paint but hammerite will be fine. Great thanks guys, I shall carry on with the acryllic paint I have. Thanks Rob Share this post Link to post Share on other sites
Bassman 1 Posted October 29, 2007 One side on. Before After Tight V. Tight!! Share this post Link to post Share on other sites
