5150maxie 0 Posted September 25, 2007 can 1.9 rear torsion bars fit the 1.6 beam? Share this post Link to post Share on other sites
Guest smokinslim Posted September 25, 2007 yes, the bars are the same on both models aren't they... Share this post Link to post Share on other sites
Anthony 1,000 Posted September 25, 2007 1.6 and 1.9 beams are basically identical, except for the stub axles and hubs (and obviously the drum/disk brakes) Share this post Link to post Share on other sites
5150maxie 0 Posted September 25, 2007 1.6 and 1.9 beams are basically identical, except for the stub axles and hubs (and obviously the drum/disk brakes) so can you swap the stub axles and hubs over easy and renew in the bearings say 1.9 to fit 1.6? Share this post Link to post Share on other sites
pug_ham 242 3 Cars Posted September 28, 2007 so can you swap the stub axles and hubs over easy and renew in the bearings say 1.9 to fit 1.6? Yes, I've done this a few times before. Although usually 1.6 to 1.9. Graham. Share this post Link to post Share on other sites
5150maxie 0 Posted September 28, 2007 Yes, I've done this a few times before. Although usually 1.6 to 1.9. Graham. yeh sorry i meant 1.6 to 1.9 nice one thanks Share this post Link to post Share on other sites
