Guest vhail8 Posted September 2, 2007 Ok just had my rear hubs off to check on the handbrake mechanism, all was fine so i just adjusted it back (with the nut by the lever) , now i need to retorque the hub nuts and can i find my manual? can i buggery! Did a search on here and came up with zilch for the 1.6 on drums, can someone help please? Just need a torque figure really, thanks in advance.... Share this post Link to post Share on other sites
Ryan 99 Posted September 2, 2007 159 ft.lbs / 215nm Share this post Link to post Share on other sites
Guest richardm Posted September 2, 2007 (edited) 160 lbs ft.... (the post above was definitely NOT there when I posted ) Edited September 2, 2007 by richardm Share this post Link to post Share on other sites
Guest vhail8 Posted September 2, 2007 Thanks fellas! I found that figure on here but it was relating to rear disc brakes on a 1.9 so i was worried it wouldn't be applicable to mine... Just gotta put the (soon to be repaired) exhaust manifold back on and it's MOT time yipee... Part of the sealing surface on the manifold has been damaged the question is do i try to weld it or use JB weld/chemical metal or similar.... Share this post Link to post Share on other sites
