Jer309GTi 3 Posted September 1, 2007 On the master cylinder are the ports nearest the servo for the front or back brakes? Or doesn't it matter? It's on a 405 if it makes any difference, although I would have thought all cars were the same.... Cheers Share this post Link to post Share on other sites
pug_ham 242 3 Cars Posted September 2, 2007 I'm pretty sure they will all be the same, especially considering the 205 1.9 GTi has a diagonal split with a front brake pipe going from both a front & a rear outlet. Graham. Share this post Link to post Share on other sites
Richie-Van-GTi 70 2 Cars Posted September 2, 2007 I dont think it will matter too much but from factory the passenger side ones correspond to the passenger wheels and the drivers side ones are reversed front to back. Hope that makes sense. Share this post Link to post Share on other sites
