Aftermarket Fuel Gauge And Sender

[smckeown 1]

anyone fitted a different fuel sender ? I've seen the senders for sale, and they look like this

 

 

anyone fitted anything like this to a pug ?

 

Do you know of the signal coming from the OE sender is compatible with any particular sender ?

[Dj_mini 7]

Iv just put a digi dash in mine i couldnt get the pug sendor to work with it so iv gone for one that they supply as it reads vairable ground readings it looks very close to the one you have pictured.

I dont have any pics of the tank but heres the dash

 

[Richie-Van-GTi 70 2 Cars]

I had one in my 306 for the autometer gauges, wqas a total pain in the bum I found as the arm isnt on a damper so the gauge went up and down on corners, hils etc. The autometer gauges work with the OE sender but read slightly under in a non linear wy, IE at full it still shows full but with half a tank it reads about 1/3rd of tank.

[Sandy 189]

SPA do a digital fuel level gauge which can be calibrated to the OE sensor. Bloody expensive though. Stack do the same in their digital dashes.

[smckeown 1]

SPA do a digital fuel level gauge which can be calibrated to the OE sensor. Bloody expensive though. Stack do the same in their digital dashes.

 

ah that's new, but seenthe price of it..sod that.

 

Ideally we need some bright spark to produce a digital display that takes in the OE signal and converts to a litres/gallons or percentages display. Might have a search for an electronics forum to see if anyone can knock that up