CJ_2_0_5 0 Posted May 11, 2007 I was asked via PM recently if I still had some data I posted a few years ago relating to the AFM characteristics. After a bit of searching I managed to find it and thought some others may find it useful and since I went to the bother of finding it I though I would post a link. http://www.sendspace.com/file/t1ss8i AFM_1.xls - AFM characteristics for 1.9 LJet Fuel.xls - Fuel pulsewidth information for 1.6 Speed_Freq.xls - Fuel cut information for 1.6/1.9 Ljet.pdf - L-Jetronic workshop manual Unfortunately, this is all the data I could find. Not sure what happend to the 1.6 AFM and 1.9 fuel pulse widths. Sorry. Cheers CJ Share this post Link to post Share on other sites
Guest Chucky Posted May 11, 2007 Thank you CJ! This is very good. Only a question. Output voltage (Ub) is measured between 5 and 7 afm terminals, and input voltage (Us) between 5 and 9 terminals. Could you please confirm? Share this post Link to post Share on other sites
CJ_2_0_5 0 Posted May 12, 2007 AFM Connector pin out 1 - Inlet Air Temp 2 - Engine Load 3 - N/C 4 - VBatt 5 - Ground Us voltage between 5 and 4 Ub voltage between 5 and 2 Can't recall why I used Us and Ub!! CJ Share this post Link to post Share on other sites
KRISKARRERA 2 1 Cars Posted May 12, 2007 Nice, wouldn't mind the motronic version as well. Share this post Link to post Share on other sites
