willxs 0 Posted April 21, 2007 not going to be using the PAS pump on the S16 engine so was wondering what belts (size wise) people use? will make up a tensioner also as the other one is knackered. so ideally, the belt only needs to be the length from the pully to the alternator. any suggestions? Cheers, Will Share this post Link to post Share on other sites
Richie-Van-GTi 70 2 Cars Posted April 21, 2007 the belt from a non PAS 306 derv should do the job but may require relocting the alternator lower down. Share this post Link to post Share on other sites
