AndyUoh 0 Posted April 3, 2007 Hey, I was wanting to change the electric motors back to windy ones. I put the door on to find they don't work.. however they are stuck fast? No play at all. I am not sure whether to get violent with a hacksaw and try and get them out.. or is there a normal way around this? Help! Andy Share this post Link to post Share on other sites
steve@cornwall 100 Posted April 3, 2007 Hey, I was wanting to change the electric motors back to windy ones. I put the door on to find they don't work.. however they are stuck fast? No play at all. I am not sure whether to get violent with a hacksaw and try and get them out.. or is there a normal way around this? Help! Andy If memory serves... Where the motor slips onto the spindle (where the handles will go) there is a small phillips head screw locking the inner and outer gears together. When removed you should be able to bring the window down with a hand pressure either side of the glass Share this post Link to post Share on other sites
AndyUoh 0 Posted April 4, 2007 Hey dude, thanks for the reply. I looked at the spare one i had knocking around, im guessing it was the torque screw on top of the motor casing? http://i152.photobucket.com/albums/s196/an...pg?t=1175697887 http://i152.photobucket.com/albums/s196/an...pg?t=1175698028 If it is.. im screwed (excuse the pun). Because I can't find my T20 Grr.. Andy Share this post Link to post Share on other sites
