pipespug 0 Posted March 21, 2007 Does anyone know whether Hiflo heads is still in business. I cannot access the webb site. Also i am looking for a competent engine builder in the south to bulid me a 2.2 iron block, i have an Mi16 head with very large inlet valves that will only fit 85mm alloy liners. As i have destroyed two of these liners i am planning on rebuilding the iron block way. Regards Pipes. Share this post Link to post Share on other sites
mos 1 Posted March 21, 2007 you could talk to mattsav at qep (forum sponsor) he built me a 2.1 bottom end (87mm piston and 88mm crank) we were going to build an 88mm piston option but matt felt, after examining a scrap spare block i gave him, that the 88mm piston option may not have the longevity i was looking for so we went the 87mm piston route instead Share this post Link to post Share on other sites
pipespug 0 Posted March 21, 2007 Thanks mate i will give him a try. Regards Pipes. Share this post Link to post Share on other sites
TEKNOPUG 3 Posted March 21, 2007 Hi-Flow is most defintely in the North!! Share this post Link to post Share on other sites
Richie-Van-GTi 70 2 Cars Posted March 21, 2007 Hi-Flow is most defintely in the North!! yep, its well north from me and Im up north anyway!! Share this post Link to post Share on other sites
