boldy205 74 Posted March 9, 2007 Hi, i am puttng a 309 GTI beam together and when i have put the Torsion bars in (at the same ride height!!) the ARB wont line up, as in i have to pull/ push the suspension arms up/down to make the ARB end plates line up with the bolt holes on the end plates., is this normall? Thanks Matt. Share this post Link to post Share on other sites
Jrod 7 Posted March 10, 2007 Yes, just get it on the closest spline. Share this post Link to post Share on other sites
Miles 331 1 Cars Posted March 10, 2007 I had this on a beam the other week, It was a good 15mm out of line on eihter spline, Changed it for another ARB I had laying around and it fitted straight on without the need of moving the trailing arms, Share this post Link to post Share on other sites
Jrod 7 Posted March 10, 2007 Was covered only a week or so ago. http://forum.205gtidrivers.com/index.php?s...1564&hl=arb Share this post Link to post Share on other sites
boldy205 74 Posted March 10, 2007 Thanks for that, its exactly the same prob as im having, i will just tweek it up a but then. Chears. Matt. Share this post Link to post Share on other sites
