205_sunderland 4 Posted February 6, 2007 (edited) i have a magnex full system on car and only have till end of month to finish my car and im runing out of cash now and still need clutch, plugs, and leads front bumper and arches, seen as thou the going rate for a 4 to 2 into 1 manifold is the equivalent to your soul for an mi 205, is the bore same on magnex 4 branch for 8v i was thinking of getting one and making a plate off my mi manifold at work and removing 8v plate and welding that on instead, i would like to think the port spacing is similar so i could get away with it and thus make a budget 4,2,1 and thus clear bulkhead also? regards michael Edited February 6, 2007 by 205_sunderland Share this post Link to post Share on other sites
Edd-XS 0 Posted February 6, 2007 Im no exhaust expert but wouldn't the fact the Mi head has 8 exhaust ports be a bit of an issue? Unless you can double them together with the adaptor plate or something...? Edd Share this post Link to post Share on other sites
Baz 421 Posted February 6, 2007 Unfortunately not possible at all really. Economically and space consciously anway. Share this post Link to post Share on other sites
205_sunderland 4 Posted February 6, 2007 ow well was justa thought as i cant afford a 4,2,1 and need that end Share this post Link to post Share on other sites