mitch205gti 1 Posted January 20, 2007 Anybody know what size brake pipe I need for my 1.6? I recently bought a flaring kit so thought I do it my self but don't know what size pipe I should be buying? Cheers Mitch Share this post Link to post Share on other sites
Jer309GTi 3 Posted January 20, 2007 3/16, or 4.75mm I think it is Share this post Link to post Share on other sites
Normski 1 Posted January 20, 2007 Yes that's right. Share this post Link to post Share on other sites
mitch205gti 1 Posted January 20, 2007 Cheers There is loads on ebay dirt cheap for 25m so think I'll get some ordered. Share this post Link to post Share on other sites
Jer309GTi 3 Posted January 20, 2007 Thanks for mentioning that Mitch, I need to buy some more too Share this post Link to post Share on other sites
sutol 0 Posted January 20, 2007 Cheers There is loads on ebay dirt cheap for 25m so think I'll get some ordered. Try and steer clear of the steel stuff it's a bugger to flair. The copper is more expensive but you will make a good safe job of your flairs/ends and it's easier to bend into shape. Share this post Link to post Share on other sites
futura 3 Posted January 20, 2007 (edited) I've got a 10 meter roll of copper unused that I want to sell. I am in the process of doing my brake lines and already had enough from a previous roll so this one won't be of any use to me (unless I messed up and cut too short). I am finishing the job tomorrow so I'll be able to tell you thenn if my roll is still complete. PM me if interested Edited January 20, 2007 by futura Share this post Link to post Share on other sites
pug_ham 242 3 Cars Posted January 20, 2007 There is loads on ebay dirt cheap for 25m so think I'll get some ordered. Its the postage that adds the price up, I can get a 25m roll of 3/16 copper brake pipe for about £6 at my local motor factors & unions for 10p each. Graham. Share this post Link to post Share on other sites
sutol 0 Posted January 20, 2007 Its the postage that adds the price up, I can get a 25m roll of 3/16 copper brake pipe for about £6 at my local motor factors & unions for 10p each. Graham. I think you will find that it has gone up very recently due to the price of copper going through the roof. Maybe old stock though. Share this post Link to post Share on other sites
