Guest rich1977 Posted January 13, 2007 right need to put my new stereo into the pug but the red plug has been cut by previous owner so cant just use a iso adapter , I would use my multimeter but some daft idiot left it switched on last time it was used can anyone tell me what does what not bothered about speaker wirring as I will be running better quality O/F cable in anyway bellow is what I belive to be correct and the blanks are what im unsure of so If ive got it wrong feel free to correct. I have used the search function but didnt find what I needed thanks in advance for any help. red = 12v+ perm black= ground sollid blue ? blue and white striped? im presuming the other wires are speaker wires with a looped ground on front and rear, is sollid blue switched? and blue and white illumintaion? Share this post Link to post Share on other sites
scumbag 0 Posted January 14, 2007 Yeah it's a nightmare. Here: 12v Battery (Goes to 12v+ on head unit) - Thick grey / white Earth - Green / Yellow stripe. The accessory switch, likely on ur head unit to be acc - Light blue The power cables are a thicker than the mass of thin speaker wires. Speaker wires are like cotton!!! Share this post Link to post Share on other sites
