5150maxie 0 Posted December 2, 2006 (edited) ive search but nothing for what i m after.ive locked the cam pulleys with the dowels as they only fit in one position.ive set the crank pulley to 12 o'clock and put a pin in to stop it moving. The pistons are all at about half way.the thing is some of the valves are open is there any chance they will catch the pistons and bend the valve when i turn over by hand?some pictures would be great help cheers Edited December 2, 2006 by 5150maxie Share this post Link to post Share on other sites
Banjo 1 Posted December 2, 2006 No, if all the dowels are in its right. Share this post Link to post Share on other sites
Normski 1 Posted December 2, 2006 Some of the valves do sit an open position when the cams are locked in position, that's right enough. Share this post Link to post Share on other sites
5150maxie 0 Posted December 2, 2006 ive got the head on and torqued up im good to go just that little niggle i had thanks Share this post Link to post Share on other sites
