Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Guest Andy5

Tt Turbo Coolant Supply

Recommended Posts

Guest Andy5

Hi,

 

Wonder if anyone can help. There are similar posts already but non seem to answer my specific question regarding coolant supply to and from the T25 turbo in the TT conversion.

 

I'm currently installing a 'new' 1.9ish engine (83.5mm forged BDA pistons, steel rods, worked head, hybrid T25 on TT manifold running Emerald management ) in to a previously unmodified, 12000 mile from new 1.6Gti.

 

Sorted just about everything else apart from the above subject. I assume the TT layout worked?and if so could anyone point me in the direction of the layout used. i.e where is the water supply taken from and where does it re-enter the coolant system after the turbo and how was it fabricated, pipe diameters etc

 

If the TT system wasn't that great any idea's on how to do it better?

 

Thanks,

 

Andy

Share this post


Link to post
Share on other sites
TEKNOPUG

It comes from the water pipes that enter the bulkhead, above the turbo.

I'll have a look tomorrow and tell you where it rejoins.

Share this post


Link to post
Share on other sites
Guest rick03054

The top hose for the matrix from the water distribution block, with the bleed screw, is cut and the turbo goes between the two ends.

Share this post


Link to post
Share on other sites
pdd144c
The top hose for the matrix from the water distribution block, with the bleed screw, is cut and the turbo goes between the two ends.

 

Correct!

Share this post


Link to post
Share on other sites
Ryan

TBH it doesn't really matter, just connect to whichever water pipes are easiest/nearest.

Share this post


Link to post
Share on other sites
pdd144c

They are the nearest, hence why they are used!!

Share this post


Link to post
Share on other sites
Ryan

Yes, I was being a spaz and thinking the turbo was round at the side. :)

Edited by Ryan

Share this post


Link to post
Share on other sites
pdd144c

Haha! Like mine then!

Share this post


Link to post
Share on other sites
Guest Andy5

Thanks for the info,sounds logical so I'll have a look at that tonight.

 

Andy

Share this post


Link to post
Share on other sites
Sign in to follow this  

×