Beam And Trailing Arm Shaft Dimensions

[V8Pete 0]

Hello

 

Does anyone know what the diameters of the rear beam and trailing arm shafts are supposed to be where the bearings sit?

 

Thanks.

[Higgy 0]

Hi,

 

I finally got around to measuring a shaft last night, although I forgot to bring the paper with me.

 

I will post it up tonight.

 

Higgy.

[Anthony 1,000]

If you do a search I know that I've posted this information before now...

[Higgy 0]

Here be it:

 

[V8Pete 0]

If you do a search I know that I've posted this information before now...

I did about 100 times, and I'm typically a good searcher but couldn't find anything except my own

 

Would be interested in a link to your results to see how they compare with Higgy's.

 

 

Here be it:

Thanks

[cybernck 400 1 Cars]

little bit more info here:

 

http://forum.205gtidrivers.com/index.php?s...st&p=620092

[welshpug 1,626]

so the outer bearing dimensions would be 54mm Od, 47mm Id and IIRC 20 mm deep?

 

and the inner bearings 42mm Id but whats the O.d?

 

I'm a bit confused by that diagram! cant work out what the figures on the left mean as they dont make sense

 

I may have found a source of good bearings other than Peugeot.

[Higgy 0]

so the outer bearing dimensions would be 54mm Od, 47mm Id and IIRC 20 mm deep?

 

and the inner bearings 42mm Id but whats the O.d?

 

I'm a bit confused by that diagram! cant work out what the figures on the left mean as they dont make sense

 

I may have found a source of good bearings other than Peugeot.

 

The figures on the left are the dimensions of the shaft where it fits into the swing arm.

 

( I knew I should have drawn it to BS 8888 )

 

People like Anthony, who buy bearings a lot should be able to give you the dimensions.

 

Bearings usually have the dimensions stamped on them.

 

Higgy.