vern 0 Posted November 8, 2006 I have been into peugeot to get a price for a new servo £136, but they listed a kit and was unsure if this is a rebuild kit there was 2 listed (DBA and TEVES) both were under £20. Has anyone done a rebuild if so what did they use??. Share this post Link to post Share on other sites
Banjo 1 Posted November 8, 2006 A rebuild kit would prob just be some seals, get a mc from gsf.. Share this post Link to post Share on other sites
vern 0 Posted November 8, 2006 Not the M/C, the servo the bit the M/C bolts to. Share this post Link to post Share on other sites
bren_1.3 1 Posted November 8, 2006 cheap enough to source from a breakers yard no? Share this post Link to post Share on other sites
vern 0 Posted November 8, 2006 yes easy enough to get from a scrappy but will all be a minimum of 12 years old, and will all need repairing soon, and as I have the front of the car stripped thought would renew or refurb while all apart. Share this post Link to post Share on other sites
bren_1.3 1 Posted November 8, 2006 i see your repairing it for peace of mind. dont tend to hear about them failing that often though. Share this post Link to post Share on other sites
welshpug 1,626 Posted November 8, 2006 if peugeot list it there should be some diagrams showing what's included, thatll give you some idea of what's involved. Share this post Link to post Share on other sites
vern 0 Posted November 8, 2006 Yes bren just don't want to get it back together and it break on me. welshpug was hoping someone had done it to shed some light on which of the 2 kits to use, as main stealers could not shed any light on which one to use either. Share this post Link to post Share on other sites
welshpug 1,626 Posted November 8, 2006 of what I can see on the PCD the 2 kits are slightly different. it may depend on the manufacturer of your servo? are there any ID marks on it? or would it need removing? heres a screenprint of the page in question - Share this post Link to post Share on other sites
Banjo 1 Posted November 8, 2006 My bad should read more! Theres not a lot inside a servo, dont think i've ever heard of one completely stop working, can leak sometimes, even if it didnt work you would still have brakes.. Ben Share this post Link to post Share on other sites
vince 0 Posted November 10, 2006 of what I can see on the PCD the 2 kits are slightly different. it may depend on the manufacturer of your servo? are there any ID marks on it? or would it need removing? heres a screenprint of the page in question - hey where did you get that software? are you a professional and if not how can I get it? vince Share this post Link to post Share on other sites
