Wes 86 1 Cars Posted September 16, 2006 has anyone used these: http://cgi.ebay.co.uk/Peugeot-205-309-gti-...1QQcmdZViewItem and are they any good? what is peoples recomendations for rods and quickshift? Share this post Link to post Share on other sites
pdd144c 0 Posted September 16, 2006 (edited) Not sure about those ones, but I have the Xsport rods and bearing kit on my 205. Cheaper too and race proven. Xsport Racing Ebay Shop Edited September 16, 2006 by pdd144c Share this post Link to post Share on other sites
cybernck 400 1 Cars Posted September 17, 2006 if you order from constella, make sure you ask for 205gtidrivers.com discount . Share this post Link to post Share on other sites
welshpug 1,627 Posted September 17, 2006 this is ideally what you want, as the constella ones are only a steel cup not a bearing - http://www.wmmotorsport.com/acatalog/p205-gearbox.html proper rose jointed or if you scroll down a bit you'll find the basic steel jointed kit for much less than the constella ones. the other bit thats a good idea to replace is the main pivot, Miles has a pretty damn goog solution to the nylon bush - http://cgi.ebay.co.uk/Xsport-Racing-Peugeo...oQQcmdZViewItem Share this post Link to post Share on other sites
pdd144c 0 Posted September 17, 2006 Miles no longer works at Xsport. He has been trading under Pug Racing for the last 4 or so months! Share this post Link to post Share on other sites
Guest rob205gti6 Posted September 18, 2006 And you will find that Greg at Xsport makes the quick shifts himself. Share this post Link to post Share on other sites
Guest judgefudge Posted September 18, 2006 I've got the full kit from Miles on mine, best money i've spent on the car so far. See - http://forum.205gtidrivers.com/index.php?showtopic=55983 Share this post Link to post Share on other sites
