Guest fisherspug Posted August 25, 2006 hey guys, could any of you help me out. im off to the bolt shop tomorrow, need a list of what bolts and attachments will be needed, to attach front bvalance, stateing how many will be needed and what item, big nusence i know. cheers guys. fisher Share this post Link to post Share on other sites
Edp 67 3 Cars Posted August 26, 2006 I think its two 8mm bolts in the sides by the arch and a few of those white plastic clips which slide onto the bumper and valence. I think the only bolts you need are the side ones. I'm unsure what there technical name is. Share this post Link to post Share on other sites
sonofsam 5 Posted August 26, 2006 Get some washers to with the nut and bolts otherwise they might pull through Breakers would be the best bet for those clips Share this post Link to post Share on other sites
steve@cornwall 100 Posted August 26, 2006 Breakers would be the best bet for those clips Clips don't hold the valence too well, I use cable ties! Share this post Link to post Share on other sites
sonofsam 5 Posted August 26, 2006 Hold mine on fine and thats a pattern part bumper and pug sport valance. So not the best fit in the world! Share this post Link to post Share on other sites
Guest fisherspug Posted August 27, 2006 cheers guys, go tomorrow get that list, love the cable tie idea, got s*it loads of them.lol cheers fisher Share this post Link to post Share on other sites
welshpug 1,627 Posted August 29, 2006 i didnt bother with cable ties, 8 stainless steel M5 nuts and bolts and some washers. I also reused the T bolts but with M8 stainless nuts (and half a ton of copper grease...) Share this post Link to post Share on other sites
ashley peddle 3 Posted August 29, 2006 cable ties are the future if you catch it on a curb or anything like that the cable ties just snap meaning less damage to the valence also getting the nuts in place / done up is a right bitch of a job - sooo much easier / quicker with ties Share this post Link to post Share on other sites
