Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Pug_sport

106 Help Needed!

Recommended Posts

Pug_sport

Just got a 106 1.1 zest on a W for £100 (still got 205) but it is almost full to the top of the head with emulsified oil, if you take the spark plugs out and roll the car in gear (as the starter wont turn) it throws out lots of yellow crap from the spark plug holes. I was thinking either head gasket or liners but i don't know if it has liners.

 

Any idea's as I have lots of them and im trying to narrow it down?

 

P.s girlfriend wont let me set it on fire or hit it with a big hammer as these are two of my idea's.

:)

Share this post


Link to post
Share on other sites
ALEX

I'd say it's the head gasket thats gone.

But a bit premeture for a W reg though, how many miles it done?

When you remove the head get it checked to see if it needs skimming.

The 106 TU engine im in the process of fixing has wet liners.

Just dont turn the crank with the head off, this will disturb the seals.

£100 for a W. reg, not a bad deal if its only head gasket thats gone.

Share this post


Link to post
Share on other sites
t16ryan

why wont the engine turn over? prob say second hand engine is your best bet,

Share this post


Link to post
Share on other sites
Sign in to follow this  

×