Danxs 0 Posted June 3, 2006 seems my car is having a spree of faults, first the heater blower, now the speedo packed up on me today, it was reading fine, it had a bit of a fit, then just died, does it sound like the cable? are they are hard job, i know 106's are damn hard! its a 309 gti, btw. Share this post Link to post Share on other sites
Ahl 4 Posted June 3, 2006 Its not very hard, but its one of those jobs where when you've done it once its fairly easy to do it again, but fiddly the first time. You need to be careful taking the dash cowling apart as its dead easy to snap bits. Getting the speedo cable into the back of the speedometer is also a little fiddly, but its fine with perseverance. Share this post Link to post Share on other sites
Danxs 0 Posted June 3, 2006 cool, great, thanks alot. i have my road angel for now as a speedo! Share this post Link to post Share on other sites
j_turnell 134 3 Cars Posted June 3, 2006 It could also be the speedo drive, the plastic cog is renowned for breaking so this may also be a possibility. Simple to do just a driveshaft out job. Share this post Link to post Share on other sites
Danxs 0 Posted June 3, 2006 my 106 broke one of those, was easy peasy on that, i will look into it further tomorrow, cheers guys. Share this post Link to post Share on other sites
Edp 67 3 Cars Posted June 4, 2006 My speedo stops and gets stuck at 90mph. Thats another job on the list! Share this post Link to post Share on other sites
