Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Jez G

Distributor Lead Pulled Apart !

Recommended Posts

Jez G

Image008.jpg

 

Image009.jpg

 

Image010.jpg

 

Help !!

 

The above pictures are from the lead going into the distributor from the ingintion module, I have managed to pull the wires out of the black connector. :P

 

I have no idea which wires go back in which hole ... :)

 

The black connector is numbered 1, 2 and 3. I have a red wire a green wire and a braded eath.

 

Can someone please tell me the correct wires to put back in the right holes ....

 

Thanks in advance

 

Jez

Share this post


Link to post
Share on other sites
Jez G

Anyone ?

 

I am a bit reluctant to ramdomly try in case I do more damage !

 

If not I will try to get my local Pug dealer to help ... or sell me a new bit of harness.

 

The car is off the road until I can sort this out.

 

Jez

Share this post


Link to post
Share on other sites
pug_ham

I've got this at home afaik on the loom I removed from my car when I fitted the MP3.1.

 

I'll look later & let you know.

 

Graham.

Share this post


Link to post
Share on other sites
Jez G

Many Thanks

 

Jez

Share this post


Link to post
Share on other sites
pug_ham

Picture attached, spring clip facing you & they run Black (braided cable), green red left to right.

 

Checked the loom I have & a p;ug that i got from a scrapyard ages ago that I'd forgotten I had.

 

Graham.

post-71-1146846766_thumb.jpg

Share this post


Link to post
Share on other sites
Jez G

Graham, thanks, hopefully the thing will start now, once I have sorted this out

 

 

Jez

Edited by Jez G

Share this post


Link to post
Share on other sites
Jez G

Worked a treat .... thanks again Graham, it started first turn of the key !!!

 

... now of for an mot, and no doubt more problems !

 

Jez

Share this post


Link to post
Share on other sites
Sign in to follow this  

×