mikeyde 1 Posted March 1, 2006 Just now i have a K+N fitted to the pug which sits in the inner wing pretty much, behind the nearside headlamp. I've just got a BMC filter (the carbon style cover) which i would like to use but i cant fit it in the same place. What shall i do/where shall i put it? has anyone fitted this filter before? Share this post Link to post Share on other sites
Jonmurgie 2 Posted March 1, 2006 Not heard of a BMC one being fitted on a 205 as it's pretty much like the standard air filter setup anyhow!! Share this post Link to post Share on other sites
pug_ham 244 3 Cars Posted March 2, 2006 You can get BMC cone filters Jon, a mate had one on his Golf. Why can't you fit it in teh same place? Pure due to the size? I'd forget about it & keep the K&N kit instead. Graham. Share this post Link to post Share on other sites
dee205 3 Posted March 2, 2006 You'd be just aswell moving the washer bottle and using an Mi airbox with a K&N panel filter as Jonmurgie said the BMC on is the same job. I've seen a few cone filter Vs panel filter RRs and the panel filter gave gains ( only a few horses) but the cone filter gave losses of a few brake. Damien Share this post Link to post Share on other sites
mikeyde 1 Posted March 2, 2006 bugger! might just ebay the turd. cheers! Share this post Link to post Share on other sites
pug_ham 244 3 Cars Posted March 4, 2006 I've seen a few cone filter Vs panel filter RRs and the panel filter gave gains ( only a few horses) but the cone filter gave losses of a few brake.I must've seen the same article as I've heard that the BMC cones were rubbish as well. Graham. Share this post Link to post Share on other sites
