Steering rack heatshield

[Gavin Waddell 18]

Does any one have a photo of how the steering rack heat shield is fixed? I took my off to repaint the subframe and can't remember how it goes back.

 

Thanks Gavin.

[Tom Fenton 1,632]

2 screws attach it to the subframe. Then a spring clip goes round the steering rack. Assuming it’s a non-PAS one anyway. The PAS slightly different.

[welshpug 1,721]

the parts listing for a 205 only shows one Heatshield, no distinction for PAS/NON-PAS.

 

 

 A 309 does have a specific power steering heatshield but it attaches in exactly the same way Tom described, but may have two clips over the rack body rather than one.

[Leslie green 159]