Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

ATK

Boot light staying on constantly?

Recommended Posts

ATK

Hi all

 

In process of fixing little bits and pieces on my Pug. Tracked my battery drain down to the boot light staying on all the time!

 

Unplugged the switch in the tailgate - still stays on

 

Fitted brand new switch - still stays on!

 

This all happens even with the key out of the ignition.

 

Anyone know how these circuits work?

 

Only wires are the green wire /earth (?) to the switch in the tailgate, and  on the bootlight itself, one red wire (live?) on one side of the connector and on the other side a green wire and a brown wire together.

 

Rear lights, wiper etc all work perfectly so don't think it's the rear earth blocks as never had an issue there.

 

Cheers

Share this post


Link to post
Share on other sites
bacardincoke

Swap the glove box light (assuming it's not faulty) out with the boot one, they're the same, to eliminate the actual unit as the problem.

Share this post


Link to post
Share on other sites
ATK

Just tried that, didn’t resolve it!

Share this post


Link to post
Share on other sites
boldy205

Sounds like the light itself is earthing out somewhere 

Share this post


Link to post
Share on other sites
bacardincoke

The feed into the light being permanent live is presumably how things left the factory, makes sense that it's to allow the boot light to come on when the hatch is lifted regardless of whether the keys are in the ignition or not.

 

From what you've said so far it's pointing towards the possibility the earth from the light to the hatch switch is earthing continuously, worse case is it's chaffing somewhere hidden.

 

Try disconnecting the existing earth wire at the light and the switch, bypassing it by mocking up a substitute in its place.

 

 

 

 

 

 

Share this post


Link to post
Share on other sites
ATK

Has started working again now strangely! The light needed to be earthed to the body on the little tab too it would appear! French electrics eh!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×