Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Ginerbolox

Subframe help for 1.7d junior

Recommended Posts

xstian

It looks like the right one to me. 

 

If you are going to the effort of fitting a new subframe, have you thought about fitting the GTi one?

Share this post


Link to post
Share on other sites
Ozymandis

Make sure the anti roll bar is the same diameter.

 

You can tell from the colour of the bushes under the two anti roll bar clamps, for a diesel they want to be blue coloured ones, ask him to look at the colour.

 

Its a 23mm anti roll bar you need.

 

https://www.ebay.com/itm/Front-Anti-Roll-Bar-Bush-For-Peugeot-205-309-Citroen-C15-509440-5094-40-/203002136573?_trksid=p2385738.m4383.l44720.c10&nordt=true&rt=nc&orig_cvip=true

 

The other possible variable is the position of the gear change pivots on it, that one is correct for a diesel.

  • Like 1

Share this post


Link to post
Share on other sites
Ginerbolox
10 hours ago, xstian said:

It looks like the right one to me. 

 

If you are going to the effort of fitting a new subframe, have you thought about fitting the GTi one?

It won't be me fitting the subframe. My local garage will be. If the gti is a straight swap then I would definitely get one, although I suspect it won't be. 

Share this post


Link to post
Share on other sites
Ginerbolox

Thanks for the replys lads it's appreciated. 

Thanks Giner. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×