306 2.0 TURBO 8v exhaust manifold

[Ferdinand23Ham 0]

Hi all, have joined from f/b as not allowed to advertise on there!!!
My 306 has been treated to a 2.0 turbo conversion carried out by me and my mate. I wanted certain things done in a certain way (don't we all!!!).
Firstly, I wanted a HDI 3dr shell for the cheap RFL and Cyclones.
Wanted totally standard from outside.
Factory look under bonnet.
And the loom done so I can remove and refit another HDI easily and the 2.0 back into another 406 with the loom not all butched.
This has all been achieved but the only issue being the turbo stroking again the bulkhead  . Have cut some of the box section to give more clearance but still not sufficient. The steering column is the obstacle now. I rewelded rear mount slightly longer to give clearance but would like to use original size mount. Please tell me, because I had a bad experience in the selection exhaust for 6.7 powerstroke.
Is this possible keeping it looking standard????

[welshpug 1,621]

 https://www.dp-engineering.nl/citroen-peugeot-equal-length-xu-8v-turbo-manifold-v3.html

[camgti 56]

I have one of these manifold for sale.