Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
ALEX

Parcel Shelf Brackets 3d printed

Recommended Posts

ALEX

These are available on Thingiverse now.

My own creation copied the best I could from a single side and mirrored for the other.

https://www.thingiverse.com/thing:4386683/files

Not sure if they'll be strong enough in PLA, Maybe better in ABS?

Let me know if anyone uses one and how it goes as I dont have a GTI to test them.

 

205 Parcel Shelf Bracket Drivers Side 1.STL

205 Parcel Shelf Bracket Passangers Side 1.STL

20200523_111451.jpg

20200523_111521.jpg

  • Like 1

Share this post


Link to post
Share on other sites
welshpug

gti shelf is no different to base model

Share this post


Link to post
Share on other sites
ALEX

Print these on the flat edge so the hook part is printed on the bed first, not as the above photo these were printed on the base with the handing written on it. These ended up been weak as the z axis lines are aligned with the part that is stressed.

See photo below using a resolution of 0.15mm using my CR10S. Print with supports everywhere.

 

 

3d print & original.jpg

Edited by ALEX

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×