mmt 14 Posted May 12, 2020 (edited) Hi guys, what is this? 1,6 or 1,9 hub? it is currently on a 1,6 car however he says it fit mi16 shafts ?!? thanks. Edited May 12, 2020 by mmt Share this post Link to post Share on other sites
welshpug 1,621 Posted May 12, 2020 look at the disc offset, or the size of the threads, base model and 1.6 have m20, 1.9 is m24. mi16 shafts are too long. Share this post Link to post Share on other sites
mmt 14 Posted May 12, 2020 Thanks. Do you know What the offsets’ are? are there any Other easy Way to tell the difference ? Share this post Link to post Share on other sites
pug_ham 240 3 Cars Posted May 12, 2020 From looking at the drive flange that's a 1.9 hub imo. These notches are only present on the 1.9 GTI hub, 1.6 & base have a plain edge to the drive flange. If you took the driveshaft out, what size was the hub nut? 30mm is base / 1.6 GTI & 35mm is 1.9 GTI in my experience. g Share this post Link to post Share on other sites
mmt 14 Posted May 12, 2020 Thanks Graham. Found your old post on the notches. I’ll ask the guy about the shaft and nut size(did I just write that!). :-) thanks Share this post Link to post Share on other sites
mmt 14 Posted May 13, 2020 Now collected. It is 1,9 hubs. thanks for your input. Share this post Link to post Share on other sites