Bare minimum (suspension) for a rolling chassis 1.9 GTi

[Kambo 9]

Cars not running nor has any front suspension on, the front end has been on axles with the engine out 

 

I need to move the car about in the garage (mainly forwards and backwards) brakes not important as only hand pushing but some very minor steering might be needed

 

So can I get away with just subframe, steering rack, struts, hubs, discs and wishbones to get the wheels on?

 

Thanks 

[Roeland_Vester 5]

comstructing a simple frame with a few caster wheels seems easier.

[Tom Fenton 1,524]

I was going to suggest if you  have a large decent trolley jack then use that with a length of 4x2 timber just to move it about the garage.

[Batfink 201]

The driveshafts retain the hub bearings so as long as you dont move it much or steer it you should be able to move it a couple of times. Probably better to put the driveshafts in and  cable tie/string them up off the subframe

[welshpug 1,621]

some M24 Nuts and bolts and a few large washers will suffice.