Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Recommended Posts

Telf

After fitting the head on my engine build I've discovered I need 2 shims. Went to the dealer and predictably they cant supply them.

 

Any body give me advice mw where to get them from please?

 

Share this post


Link to post
Share on other sites
welshpug

try a different dealer.

 

what sizes do you need?

Share this post


Link to post
Share on other sites
welshpug

shims were still used till 2007 so getting them should not be an issue, any engine/cylinder head rebuilder will have a stock of them too.

Share this post


Link to post
Share on other sites
DamirGTI

If you need thinner , you can "trim" them down  ..

 

As above , also most aftermakret car part shops have them these days aside from OE .

 

D

Share this post


Link to post
Share on other sites
Telf

i need 1 shim 3.00mm thick and another 2.95mm - this will bring them into the correct range

Share this post


Link to post
Share on other sites
pug_ham

Full list of shim sizes & part numbers;  valve shim numbers.txt

 

They are still available according to service box, downside is last time I bought some you had to by several of each size & prices of them were increasing.

 

0906 53
01
EP 2,950
 
 

0906 85 01 Ep 3

 

g

 

  • Like 1

Share this post


Link to post
Share on other sites
Telf

Thanks Graham,

 

My local dealers are bloody rubbish!
 

 

Share this post


Link to post
Share on other sites
Telf

0906 53 01 EP 2,950

0906 85 01 EP 3

 

I presume I need these 2?

 

 

Share this post


Link to post
Share on other sites
Telf

SO I called these 2 numbers through and the dealer says No!  not a good number according to service box..

 

 

Sigh

Share this post


Link to post
Share on other sites
jackherer

Have you tried calling the number I gave you?

 

How are you saying the numbers? The important part is 090653 and 090685 which shouldn't be a problem to get.

Share this post


Link to post
Share on other sites
Telf

Kieran no I haven't yet but Im going to call tomorrow.

 

I gave them the number and instantly it was a NO! bad number- I swear to god they do it on purpose

 

Share this post


Link to post
Share on other sites
jackherer

I put them both into servicebox and they're fine, and they aren't marked NFP so they /should/ be easy to get.

 

They're either doing it on purpose or they are breathtakingly incompetent.

 

Phone Dave and you'll get a sensible answer then you'll probably never phone the Ipswich dealer again.

  • Like 2

Share this post


Link to post
Share on other sites
pug_ham
8 hours ago, Telf said:

SO I called these 2 numbers through and the dealer says No!  not a good number according to service box..

 

 

Sigh

 

I took them from service box last night so I know they are good numbers & they match the list I attached which I used before to order some shims when I needed them.

 

Like Kieran says, you just need the first six digits, I highly suspect it's their incompetence!!

 

g

  • Like 1

Share this post


Link to post
Share on other sites
Telf

Graham,

 

Sorry should have replied to this sooner. It was indeed the dealers incompetence. Got the shims ordered from them in the end. Thanks very much.

  • Thanks 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×