Jump to content

Welcome to the brand new 205GTIDrivers.com website! We hope you'll enjoy it! Read the full notice here.

Sign in to follow this  
K20205

K20 Swapped And Opinions On Driveshaft Angle

Recommended Posts

K20205

Hi there,

 

Ive mounted my engine into the bay now and ive taken a picture of the angle, please tell me if they are fine because thats as far as the engine will go back without touching the subframe.

 

30bg0ol.jpg

Share this post


Link to post
Share on other sites
jackherer
Posted (edited)

I watched a Youtube video of a Dutch guy fitting a K20 into a 205 and he had to modify the subframe and/or chassis legs to get the driveshafts straight. It doesn't look like a K20 is an easy fit into a 205 sadly.

 

I think it was this video -

Edited by jackherer

Share this post


Link to post
Share on other sites
K20205
Posted (edited)

I watched a Youtube video of a Dutch guy fitting a K20 into a 205 and he had to modify the subframe and/or chassis legs to get the driveshafts straight. It doesn't look like a K20 is an easy fit into a 205 sadly.

Ive watched his videos too,

Everyone fits it in a different way and angle.

 

I didnt use spacers on the subframe just notched the part of the frame where the diff was touching.

 

t84zo7.jpg

 

ajuxyp.jpg

Edited by K20205

Share this post


Link to post
Share on other sites
jackherer

Don't get me wrong, I wasn't saying that video was the way to do it, just that there are a lot of problems with the driveshaft angles with no elegant solution that I have seen so far.

Share this post


Link to post
Share on other sites
K20205

Don't get me wrong, I wasn't saying that video was the way to do it, just that there are a lot of problems with the driveshaft angles with no elegant solution that I have seen so far.

No im not saying you said anything wrong,

Theres always problems when it comes to engine swaps especially if the engine is from another make of car.

 

I think my angles are fine but i just wanted to get other peoples views on it. A slight bit of angle wont make problems.

Share this post


Link to post
Share on other sites
Powers

I cut away and then reinforced a section of the subframe where the diff casing hits. But I designed mine so it can fit onto the standard mounting points as I didn't want to devalue the shell.

  • Like 1

Share this post


Link to post
Share on other sites
ravydavy

IMG_2509.JPG

Share this post


Link to post
Share on other sites
ravydavy

IMG_2509.JPG

Share this post


Link to post
Share on other sites
ravydavy

IMG_2512.JPG

Share this post


Link to post
Share on other sites
ravydavy

IMG_2510.thumb.JPG.a9c26e9b337bce4b7c2eb4cf879c77f3.JPG

Share this post


Link to post
Share on other sites
ravydavy

Was easy 

Share this post


Link to post
Share on other sites
cybernck

Hi, have you got a Project topic that covers your progress with the car? :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×