Monkey 0 Posted July 24, 2014 Hello! I am in need of a little help if somebody has 2 moments please? I need to order leads for a phase 1 gti - essentially one where the coil is on the wing. The king lead is different for the other coil, which I found out to my cost! Does anybody have a number plate for a phase 1 car I could use to give a supplier to make sure I get the correct part please? Thank you! Share this post Link to post Share on other sites
welshpug 1,737 Posted July 24, 2014 1.6 or 1.9? see below for part numbers. Share this post Link to post Share on other sites
Monkey 0 Posted July 24, 2014 (edited) It's an Mi16 with Ph1 coil and bolt on distributor. In short it's a bit of a mixture! Thank you by the way for your kind assistances Edited July 24, 2014 by Monkey Share this post Link to post Share on other sites
welshpug 1,737 Posted July 24, 2014 oh, afaik there arent any off the shelf leads that fit, ask miles at pugracing as I think he may know a supplier or have some to suit. Share this post Link to post Share on other sites
Miles 331 1 Cars Posted July 24, 2014 Not any more they went a while back, it's Magnecore that do the Mi kit's still Share this post Link to post Share on other sites
Monkey 0 Posted July 24, 2014 (edited) Cheers - I have dropped him a PM. Hopefully he will be happy to assist, thanks again *Edit: too slow - I guess I'll just need to piece something together then! Edited July 24, 2014 by Monkey Share this post Link to post Share on other sites
Monkey 0 Posted August 26, 2014 So... Big news! I made it! 160miles driving round Snetterton was completed on Sunday! Was excellent fun... Does anybody happen to know which spec and size silicone joiners I need to mount my R1 carbs to Bogg manifold? This time there will be a bracket, these will just be joiners for the fuel and air... it seems I neglected to notice the complete lack of bracket as they hadn't fallen off on me before the track day! Also the little foam filters, 1 per carb... they're not so good, got sucked in a bit - but they're combustable and no hard was done happily, they're mostly still there - but being replaced for something better before any more driving. 309s are sooo much fun on track! Share this post Link to post Share on other sites
