mmt 14 Posted November 5, 2013 Hi all The prior owner apperently liked short short shift gearleaver. The side to side movement is next to non existing. It is too short! Is it the short side of the "L" shaped bracket that must be adjusted to give more sideways movement? Share this post Link to post Share on other sites
DamirGTI 327 Posted November 5, 2013 If it's too short then the L bracket must've been trimmed and welded to shorten the gear lever mechanism travel : http://www.205gti.com/techquickshiftUK.htm ... or it might been some aftermarket quickshift fitted . Dunno if you're referring to the "left<->right" gear leaver movement , or "forward<->back" ? .. cos shortening the L bracket mostly effects on "forward<->back" movement . D Share this post Link to post Share on other sites
mmt 14 Posted November 5, 2013 Sorry its the left right movement which is too short. Thanks for the link. The short part af the L has been Cut as per the article in the link. I thought that cutting it there would give shorter back and forward movement. ? Share this post Link to post Share on other sites
ORB 227 1 Cars Posted November 5, 2013 Have the rods been adjusted correctly? Share this post Link to post Share on other sites
glenwah 20 Posted November 5, 2013 It's the fatter rod that pivots on the ball mounted on the sub frame that controls left to right, it may be that this has been made longer to shorten the throw. Share this post Link to post Share on other sites