Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Ryan_g1

8V Turbo Conversion. Not Sparking

Recommended Posts

Ryan_g1

How's it going guys? Having a bit of a problem with my 205. I got the engine in and running about 2 months ago. It was starting no problem. But I have just went to the garage to start working on it and now it isn't sparking. It's getting fuel but no spark. Any help appreciated

Share this post


Link to post
Share on other sites
Slo

Does the keypad (if you have it) kill fuel and spark or just 1 or the other? sounds a bit unusual for it to not work after 2 months, i had my 605 which my turbo engine came from sit on my drive for about 18 months and it fired up straight away after all that time

Share this post


Link to post
Share on other sites
Henry Yorke

Process of elimination. Keypad, ignition module, coil pack, HT leads, plugs.

  • Like 1

Share this post


Link to post
Share on other sites
Ryan_g1

I have an immobilised Ecu and an unlocked one. The problem is there with both Ecu's. I don't think the injectors are pulsing as the plugs aren't wet. I've changed the coil pack and its still the same.

Share this post


Link to post
Share on other sites
Ryan_g1

Well it turned out to be the ignition module. Thanks for your help guys

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×