pugpete1108 62 1 Cars Posted April 12, 2013 I removed this from the xu7 head and was just going to block it off .....unless by any chance it's a vacuum take off!!! As I'm in need of one for the brake servo. Share this post Link to post Share on other sites
welshpug 1,737 Posted April 12, 2013 (edited) egr afaik. edit, not quite, a valve to which an air pump is connected, basically a way to cheat the emissions. SCRAP PILE! Edited April 12, 2013 by welshpug Share this post Link to post Share on other sites
pugpete1108 62 1 Cars Posted April 12, 2013 Right o, in the bin it goes. I'm modding the coil pack bracket to block the hole up. Where can I get a vacuum take off for the servo bearing in mind I've taken off the nipple on the inlet by the tb for my map sensor. May have to drill and tap another on the inlet Share this post Link to post Share on other sites
welshpug 1,737 Posted April 12, 2013 I'd use the large bore takeoff by the throttle body for the servo, and take the map off the FPR vac feed with a tee piece. Share this post Link to post Share on other sites
pugpete1108 62 1 Cars Posted April 12, 2013 Ok dude will do cheers Share this post Link to post Share on other sites