pier_bruce 0 1 Cars Posted April 8, 2013 Been looking at customising a exhaust manifold and would like to know if anyone knows the best lengths I should make my primary and secondary tubes? Any help would be greatly appreciated Thanks Pete Share this post Link to post Share on other sites
DamirGTI 367 Posted April 8, 2013 Help us a little bit : 1. Which engine ? 2. Any modifications or just making the manifold for std. engine ? 3. Which type of the manifold 4-2-1 or 4-1 ? D Share this post Link to post Share on other sites
pier_bruce 0 1 Cars Posted April 8, 2013 Thanks for the reply d It's the XU9j4 with fast road cams solid followers and a mild tickling with the ports. Bottom end is forged.. On the manifold open to suggestions really 4-2-1.? Pete Share this post Link to post Share on other sites
Vili 18 Posted April 9, 2013 You'll get close enough by doing 4-2-1 this way: 4-outer diameter 41,5 mm, length minimum 350 mm (I would propaply do 450 mm) 2-outer diameter 48 mm and choose length so that total length is 950 mm and the actual exhaust diameter could be between 55-63 mm. The 55 mm is better. Really it all depends what are your camshaft timings and where do you wan't your manifold to work. Share this post Link to post Share on other sites
pier_bruce 0 1 Cars Posted April 10, 2013 You'll get close enough by doing 4-2-1 this way: 4-outer diameter 41,5 mm, length minimum 350 mm (I would propaply do 450 mm) 2-outer diameter 48 mm and choose length so that total length is 950 mm and the actual exhaust diameter could be between 55-63 mm. The 55 mm is better. Really it all depends what are your camshaft timings and where do you wan't your manifold to work. Ideal thanks il see if I can work something out to those dimensions. Share this post Link to post Share on other sites