NFS 32 Posted January 29, 2013 Hi, has anybody found a way to hook up a cheap AFR meter setup? looking around and the setup seems to be between £120-£150+ you can get the gauges seprately however where can you get the sensors septrately/cheaply? gauge for example. http://www.ebay.co.uk/itm/PROSPORT-SMOKED-WHITE-AFR-AIR-FUEL-RATIO-GAUGE-/140906757452?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item20ceb27d4c Share this post Link to post Share on other sites
Anthony 1,003 Posted January 29, 2013 You're confusing narrow and wideband lambda - that's narrowband, whereas the useful wideband kits are the ones that are circa £120-150 Share this post Link to post Share on other sites
NFS 32 Posted January 29, 2013 haha, i didnt read the description of the gauge, i need a wideband sensor and gauge to keep on eye on my air fuel ratio. has anyone made a cheap DIY set up? Share this post Link to post Share on other sites
Tom Fenton 1,650 Posted January 29, 2013 To be honest the wideband kits out there now are very very good value for money. Only a few years ago they were £400+. Share this post Link to post Share on other sites
NFS 32 Posted January 30, 2013 Oh, i was looking at them a few years ago for my punto turbo and they where around the sameish price, just thought there might be a way to rob a sensor of a car that has one fitted as standard and then buying a guage seprately. Share this post Link to post Share on other sites
Tom Fenton 1,650 Posted January 30, 2013 I am talking about 10 years or so ago, they have come down massively in price and are very good value IMO. Share this post Link to post Share on other sites
petert 641 Posted January 30, 2013 has anyone made a cheap DIY set up? Yep. Buy a 0-1mA panel meter. Add a 10Kohm trimpot in series and calibrate off a known low voltage source so it reads 0.6V at 0.6mA on the meter scale. Hook up to a narrow band sensor and you'll be able to read mixtures from 0.6V (14.7:1) to 0.9V (approx 12.5:1). Share this post Link to post Share on other sites