TOYBOY 1 Posted January 4, 2013 Wonder if anyone can shine some light for me. The sunroof has what i can only describe as a toothed runner down each side, one of mine has come loose. There doesn't appear to be any kind of bonding to hold it in place. Are these just a pressure fit? Has anyone come across this before? Thanks Kev Share this post Link to post Share on other sites
TOYBOY 1 Posted January 5, 2013 Anyone? Where are all the experts when you need them? lol. Share this post Link to post Share on other sites
Dizzee stuff 33 1 Cars Posted January 5, 2013 Is it the standard factory sliding sunroof? if so the plastic runners are held in place by the sunroof stops at the rear of the roof under the plastic trims, the tag that locates into the plastic runner to stop it moving may have bent. Share this post Link to post Share on other sites
TOYBOY 1 Posted January 5, 2013 Yes it's the factory sliding roof. The toothed parts actually sit inside the plastic runner. I'm going to get a pic perhaps that will clarify the issue. Share this post Link to post Share on other sites
TOYBOY 1 Posted January 5, 2013 (edited) Here's the issue And here's what is happening because of this Edited January 5, 2013 by TOYBOY Share this post Link to post Share on other sites
TOYBOY 1 Posted January 5, 2013 Ignore the 2nd pic. Doh!! Share this post Link to post Share on other sites
TOYBOY 1 Posted January 17, 2013 Could someone with a sliding sunroof please have a look for me. This issue is holding up the rebuild. Thanks Kev Share this post Link to post Share on other sites
