mang 3 Posted November 13, 2012 I think these will be big enough but im going to ask any way for a second or third opinion I have a 406 8v engine bored out to a 2.1 runing a t28-76rs turbo. The injectors I have are bocsh 0280156280 they run at 470ccm @ 3bar and 575ccm @ 4.5bar will these be big enough to run this engine??? Share this post Link to post Share on other sites
stef205 96 1 Cars Posted November 13, 2012 what power are you looking to be running? this will deciede your injector size. Share this post Link to post Share on other sites
mang 3 Posted November 14, 2012 Should push 350-400bhp Share this post Link to post Share on other sites
stef205 96 1 Cars Posted November 14, 2012 I found that the Bosch 801 green injectors are inefficient the spray is more of a stream I'm not familiar with high output injectors you may have to use low independence injectors or try peco injectors I know they do some 550cc but I wouldn't run at 5 bar (null) Share this post Link to post Share on other sites
mang 3 Posted November 14, 2012 I found that the Bosch 801 green injectors are inefficient the spray is more of a stream I'm not familiar with high output injectors you may have to use low independence injectors or try peco injectors I know they do some 550cc but I wouldn't run at 5 bar (null) I have some bosch 801 greens in the shed when I tryed them last we found them to be pants thats why I swapped to these :-) Share this post Link to post Share on other sites
stef205 96 1 Cars Posted November 14, 2012 Try peco injectors, or modify your rail to take others like from a evo impreza etc I would try keep to 3bar (null) Share this post Link to post Share on other sites