starky5 18 Posted November 6, 2012 Hi I'm about to swap my 1.9 8v for an mi16, can I use my current thermostat on the mi? Thanks Share this post Link to post Share on other sites
Anthony 1,003 Posted November 6, 2012 You can use the 8v one, but two points of note: 1) The rear coolant bypass rail won't work properly without an Mi16 thermostat 2) New thermostats are cheap enough (particular for a generic non-Mi16 one) that I would just replace with a new one as a matter of course Also, use new seals as a matter of course - often come with new 'stats, otherwise cheap to buy separately. Share this post Link to post Share on other sites
cybernck 428 1 Cars Posted November 7, 2012 1) The rear coolant bypass rail won't work properly without an Mi16 thermostat This one has always puzzled me - is it really required? One of my Mi16 engines' coolant system didn't seem to function correctly with it removed/blocked. Share this post Link to post Share on other sites
starky5 18 Posted November 7, 2012 Ok I'll pick one up, what was the model of 405 with the mi16 called? Will make life a lot easier when I head to my local motor factor! Share this post Link to post Share on other sites
S@m 156 Posted November 7, 2012 It was called.......the mi16. 1 Share this post Link to post Share on other sites
welshpug 1,737 Posted November 7, 2012 (edited) Lmfao!! 1338 03 is the part number BTW, early cars used two seals, one either side, later ones used a seal that wraps around the thermostat. Edited November 7, 2012 by welshpug Share this post Link to post Share on other sites
starky5 18 Posted November 12, 2012 Is this the correct thermostat for the mi16? http://www.carparts4less.co.uk/cp4l/c/Citroen_BX_1.9_1990/p/car-parts/car-cooling-parts-and-car-heating/cooling/car-thermostat/?209545021&1&130192e37329de359fe61525f6583ca0aa7ffa56&000325 Service box is listing 1338 03 as NFP and my local motor factors seem to be rather unhelpful when i talk to them without knowing the cars reg! Thanks Share this post Link to post Share on other sites
Anthony 1,003 Posted November 13, 2012 That's a standard 8v thermostat. The Mi16 thermostats have a 2nd part on the back that interupts flow to the coolant bypass rail across the back of the head. I'm pretty sure that it's this thermostat that you need. Share this post Link to post Share on other sites
starky5 18 Posted November 13, 2012 Ideal thanks for your help, ill get one on order and cross my fingers its the right one! Share this post Link to post Share on other sites