farmer 328 1 Cars Posted September 26, 2012 Having some problems with the drivers window regulator. When winding the window up and down there is a rough hard to move section then back to smooth, winding the passanger window is a nice clean smooth wind up and down. Is that suggestiong the regulator is dieing have tried to grease the cogs but hasnt improved anything. Any thoughts? Thanks Craig Share this post Link to post Share on other sites
pug_ham 245 3 Cars Posted September 28, 2012 Its more likely to be the window channel imo. These slide onto the glass & the winder rollers run along the channels but they are well known to rust away causing problems such as this. New ones are still available at £15.80 from Peugeot. Strangley cheaper direct than from ebay. g Share this post Link to post Share on other sites
farmer 328 1 Cars Posted September 28, 2012 Thanks Graham should of stated its a new window channel thats fitted and its in the exact same place as where the old channel was located ordered a new regulator from pug so see how it goes Craig Share this post Link to post Share on other sites
farmer 328 1 Cars Posted September 28, 2012 new regulator cured the problem job done Craig Share this post Link to post Share on other sites